V2 Smoothieboard

Everything related to the V2 Smoothieboard

Smoothieboard V2 Prime TMC2590 and TMC2660 Real world pictures
Smoothieboard V2 Prime

Smoothieboard V2 Prime MCU:  STM32H745 265pin BGA Stepper drivers: 4 onboard drivers with 2 options  TMC2660 with an ideal current range of 1.2-2.2A TMC2590 with an ideal current range of 2.4-4.6A (may require heatsinking or fan) Output MOSFETs:  4 single … Continued

not rated $230.00 Select options This product has multiple variants. The options may be chosen on the product page
Expansion board wire kit
Expansion board wire kit

This is all the parts you need to make up to 5 of the flat cable jumpers to be used to connect expansion boards to the V2 Smoothieboard or anything that uses the same IDC cables and connectors such as … Continued

not rated $10.00 Add to cart
jaUART USB to UART converter for Smoothieboard V2
jaUART

“Just another” UART is a small board that was designed to be plugged directly to the V2 Smoothieboard to monitor the Debug UART. This UART channel has a significant amount of info during setup and configuration and a UART which … Continued

not rated $15.00 Add to cart
3.3<>5v Bidirectional Level Shifter
3.3<>5v Bidirectional Level Shifter
3.3<>5v Bidirectional Level Shifter
not rated $15.00 Add to cart
6 Axis Breakout for Smoothieboard V2
6 Axis Breakout for Smoothieboard V2

6 Axis Breakout for Smoothieboard V2   This board is an expansion which plugs directy into the gadgeteer headers on the Smoothieboard V2 based boards. It allows full breakout of all necessary pins to make use of the 6 axis … Continued

not rated $50.00 Add to cart
Smoothieboard V2 Core
Smoothieboard V2 Core
This is a revision of the V2 Smoothieboard which has no onboard stepper drivers and a different FET setup primarily used for external drivers and/or those who primarily just want the low voltage/logic side of the board.  
not rated $180.00 Add to cart