Description
Authentic Smoothieboard 5xc with connector pack
-
32-bit Cortex-M3 LPC1769 with 512kB flash and 64kB RAM
-
5 A5984 stepper drivers with 1/32 microstepping
- 3 AOT240L “large” FETs, 3 ZXMN4A06GTA “small” FETs
- 10/100 Ethernet PHY installed
- Analog input section allowing for up to 4 thermistors
- 12-24v operating voltage
Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community to run the Smoothieware firmware.
Its main design goals are :
-
Uses as powerful hardware as possible at the time
-
Can control several machine types ( 3D printers, lasers, CNC mills/routers )
-
Easy to setup and use
-
Easy to do weird, new and exciting things with
-
Easy to develop for your use caseThis is an authentic Smoothieboard. Sales of this board help to continue further development and progress on the Smoothieware project.
